Home > Compaq Armada > Compaq Armada 1750 Video Drivers

Compaq Armada 1750 Video Drivers

It kind of hooks in, so you might need to slide the keyboard towards you about 1/2", and then lift the edge of the keyboard closer to the screen about 1/2" The ribbon cable is held in by a small connector; pop the connector free by lifing the left and right edges gently (lift each edge a bit at a time, until For 128MB modules (although I strongly recommend a 256MB module), the following should work: 16Meg x 64, eight chips (four per side), and 16x8 -type chips. Remove the battery and the floppy drive (the floppy is secured by a screw) so you can get at the screws in the bay openings. Source

You may be able to find better deals with more searching, or used memory. However, if you look at image 33.jpg, you see the mainboard, and the little problem connector that "CN300" plugs into, right above the memory. Have you taken a look at the images on http://www.wireball.com/images/armada/ ? It's been holding up rather well too - click the plus to expand the details below:   Backlight Repair, Long-Term Fix, and Reassembly From an e-mail I sent: I have to http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=91655

Possible methods for solving the issue: in the past, I always just plugged it back in, making sure it was snugged down, but it would invariably work loose again. maximum transfer rate / burst rate. You don't want to overdo the height of the standoff, because you wouldn't be able to get the la Best picks Reviews News Tutorials Forum MORE All articles How to Gift I placed a standoff on top of the rightmost one of those three capacitors (visible in the picture right under the heatsink as three white circles), to hold the board up

Now, if it doesn't want to even come that, I suppose the edge of the ribbon cable might possibly be caught on the edge of where the tabs hook in - for random access) should be unaffected. * - (contributed by Ryx) StorageReview.com has explored the effects of slower interfaces on drive performance, as well as directly comparing UltraATA/66 vs. Ask a Question See Latest Posts TechSpot is dedicated to computer enthusiasts and power users. That helps support the motherboard, and push it up into the connector, so everything stays together and keeps working.

But you can click on the news heading to read only this article. The CMOS battery has a small plastic cover over it; try to unlatch that and take the battery out, still connected to the board. Make sure the indentations on the side of the SO-DIMM line up with the clips properly, and don't force it.   Keyboard Removal, Detailed Procedure From an e-mail I sent: "On It will not go into windows or safe mode.

Download Compaq Armada 1750 Notebook Drivers for all Windows Operating Systems,Windows XP,Windows Vista,Windows 7. Exciting. I believe it's held by three screws - check for two near the fan, and one at the far right. Compaq claims the maximum memory this computer can take is 192MB; however I've been communicating with Chris of iamachine.com, and he has it working with 320MB of RAM (the 64MB of

Note: If you have a problem with the white data connector, such as the screen going white while you're using the computer, it could be the silver contacts tarnishing. https://us.driverscollection.com/?H=Armada%201750&By=Compaq Ads 468x60px Labels Acer (10) Asus (5) Compaq (3) Dell (3) HP (5) IBM (5) Saturday, September 24, 2011 Compaq Armada 1750 Driver Compaq Armada 1750 Drivers. The ribbon cable should then lift easily up out of the connector, and you can remove the keyboard. I haven't actually upgraded the drive in mine (although some other Armada 1750 owners have e-mailed me with successes; see next paragraph), but it looks like you'll be fine fitting an

Finally, to get the two tabs unhooked, you need to gently encourage the edge of the tabs that is towards you up out of its groove, and kind of slide the this contact form UltraATA/33, with no other variables. When booting up the message error loading explorer.exe. This news article is not using the Summary field and therefore there is no link to read more.

In addition, 256MB modules must meet the following specifications: 32Meg x 64 stated capacity (32Meg x 72 may also work) Sixteen chips on one SODIMM (eight per side, but make sure I don't advise using any sharp tools around this area, of course."   Hard Drive Upgrade From an e-mail I sent: That's an interesting observation about the hard drive. The trouble area connector is this small "CN300" connector, which plugs into the socket immediately above the memory. have a peek here Caution: you don't want it shorting out on things; wrap it in masking tape, or just unplug it and skip this step if necessary.

Looking closely we can deduce that it has 8 chips to a side. It also exposes the memory, so you may be able to rotate the keyboard up to 30 degrees CCW to give yourself enough room to work. Please come back when you're done.

Download Link Post by admin at 11:35 AM Email This BlogThis!

Rocking the display back and forth helps occasionally. First, release the two latches holding down the keyboard (on either side of the space bar) using a small, flat-bladed screw driver. This next step is very delicate, so be cautious and do not accidentally jerk the ribbon keyboard cable with its fragile connector that connects the keyboard to the laptop. Although the interface is UltraDMA/33, newer drives (such as UDMA/66 or higher) are backwards-compatible with the 33MB/sec interface.

Some new laptop drives (as of early 2006) can reach sequential transfer rates in excess of 33MB/sec (such as the Hitachi 7K100, for example); these drives will still work on the Set the screen and upper portion of the laptop aside. Then look at 34.jpg, which is flipped on the short edge to show the underside of the board. Check This Out Helpjet Driver and firmware downloadsAboutRequest driverLink to usContact usSearchHP Compaq Armada 1750 drivers Please scroll down to find a latest utilities and drivers for your HP Compaq Armada 1750.

Superior video card drivers are available for the laptop under 98/ME/2000/XP. You will need to unhook the display data connector and backlight power connector (at the upper left) in preparation for removing the top portion. Note: due to revisions, no two laptop models are exactly alike inside.   Upgrading the Memory Two clips hold down the keyboard, which when unclipped and folded up (carefully - there Select your OSWindows 2000Windows 95Windows 98Windows 3.xWindows NTOS/2Select software type

Be careful not to crack it - pry very gently with something soft, like your fingers, in the vicinity of the connectors, and work each one up a bit at a If it doesn't seem to want to come off, carefully lift/open the screen, holding the front wrist rest down since it's loose, and see if anything is still connected to the However, the average access time (e.g. There's a little carrier for the hard drive under the HDD panel in the bottom - the HDD screws into the carrier and the carrier gets inserted in the laptop.

Inserting new memory is a reversal of the procedure - slot it in at a slight angle (make sure the metal contacts almost completely disappear into the connector), then hinge it